This is my RC Ibishu Pigeon! (duh) If you think you might be interested, check out the video I made on it! *Highly Recommended*
https://www.youtube.com/watch?v=3guy0N1U_EA 

THIS IS STILL A WORK IN PROGRESS!!! 

I only have the Base and Stabilizer bodies done. All of the others not listed are being worked on. Also still working on the 4-Wheeled variant. The other 3-Wheeled trucks should be out in a few weeks

This has seriously taken me several years to make, and it has went through an innumerable amount tweaks to the parts to make it functional yet look close to the in-game vehicle. Speaking of in-game, the body was actually taken from the game, and then HEAVILY modified to fit my needs. The Pigeon is a little larger than 1:14 scale compared to measurements from BeamNG.

I will add every configuration and part from the game to the RC Pigeon, however that will take some time. Everything about the Pigeons will be faithfully and accurately adapted over to the RC version.  Here is a list in which I plan to tackle the other variants:
(In order from high to low priority)

Plus
Van / Van Plus
Rock Dove
Streetcleaner
Drag
Drift
Race
(I don't think I'll do the Poogeon, but if a lot of people want me to I will consider it!)

Just a quick sidenote; if you don't know what all of the different models are called, look here: https://beamng.fandom.com/wiki/Ibishu_Pigeon 
All of the different bodies will correspond to the naming of them in game. So if you like a particular Pigeon just look for it in the files and print that one. Also note there are different suspension setups and wheel configurations you should be aware of

PRICING
Currently, the price of this is set at $12.50. As I add more to the Pigeon, I will slowly raise the price to about $20 and then that will be the final price. It will go on sale back to $15 over holidays and whatnot, but just wanted to let you know in advance so you could buy in early and save a little money. If you pay now, all future updates will be free.

Non-3D printed parts:

EMAX ES08A II Analog Servo:
https://emaxmodel.com/products/emax-es08a-ii-mini-plastic-gear-analog-servo-1-8kg-sec-for-rc-models-robot 

Receiver, ESC, Battery (your choice)

SCX24 Hardware:
https://www.ebay.com/itm/115087531092?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=115087531092&targe 

1/8 inch metal rod (for rear axle)

Front Wheel Bearing (6mm ID, 10mm OD, 3mm Width)

Pen Spring

Tiny motors with transmission from Ebay:
https://www.ebay.com/itm/166283811407?var=465905970093 
(if this link is bad, search up "GA12-N20 DC 3V/6V/12V Micro Electric Gear Motor")

PARTS SUPPORT
If you keep breaking the same part over and over (5+ times) please eMail me (logan.foremans01@gmail.com) and tell me so I can modify the 3D model to be stronger. This will benefit everybody, so don't be afraid to reach out!