This allows for easy clip-free mounting of the Injora Jeep Wrangler Body on the Vanquish VS410 Chassis. Includes side skirts (purple) that fully support the weight of the body; front tongue & groove system (blue mounts to body / green mounts to chassis), and rear clipless mount (orange) that utilizes the stock fuel tank.

Stock Phoenix bumpers can be used and with front fully inward position. Phoenix rear bumper works well fully tucked for performance application; or origin bumpers can be adjusted out to suit.

Compatible with the following two Injora 12.3 (313mm) Bodies:

Jeep Wrangler 1/10 Hardbody:
https://www.aliexpress.com/item/33036898325.html

Jeep Truck 1/10 Hardbody:
https://www.aliexpress.com/item/1005002034001207.html

Minor trimming to the VS410 front fenders is required. Modification to the body itself is also required to clear the transmission; take your time and go slowly with a rotary tool. If done properly will have the top of the transmission exposed between the two seats in the correct location. Feel free to add the Vanquish scale shifter top included in your VS410 spare parts bag.

Use of Hooker Designs cantilever rear suspension is highly recommended otherwise the bed must be cut to clear the rear towers; full design available here:
https://youmagine.com/designs/f911082a-4340-4402-91a2-21cd96cb65a9