Description
This was one of my first elaborate creations in the STL world.
All the storage units have sliding doors and the rear latch uses linear sliding gears to lock the rear hatch into place.
The sleeping area also has some storage space and the Jack is adjustable plus folds away when not in use.
Hardware needed to complete a camper can also be found on Aliexpress
Screws:
M3x12 Flat socket head…………………….6pcs
M3x5 Flat socket head…………………….1pcs
M3x22 Flat socket head…………………….2pcs
M3x30 Socket Cap……………………………..1pcs
M3x18 Socket Cap……………………………..2pcs
M2x15 Socket Cap……………………………35pcs
M3 Nylon Locknuts……………………………….3pcs
The following info has been updated on July 2, 2025
All the storage units have sliding doors and the rear latch uses linear sliding gears to lock the rear hatch into place.
The sleeping area also has some storage space and the Jack is adjustable plus folds away when not in use.
Hardware needed to complete a camper can also be found on Aliexpress
Screws:
M3x12 Flat socket head…………………….6pcs
M3x5 Flat socket head…………………….1pcs
M3x22 Flat socket head…………………….2pcs
M3x30 Socket Cap……………………………..1pcs
M3x18 Socket Cap……………………………..2pcs
M2x15 Socket Cap……………………………35pcs
M3 Nylon Locknuts……………………………….3pcs
The following info has been updated on July 2, 2025
Solid Axle 140mm https://s.click.aliexpress.com/e/_ontfKNi
Hex spacers 12mm x 25mm long (or whatever width you need) https://s.click.aliexpress.com/e/_oBqs90U
Wheels and tires (these are your choice but you can use the ones below)
https://s.click.aliexpress.com/e/_oFlU27a
Springs 12mm diameter x 25mm length https://s.click.aliexpress.com/e/_oCiFHe4
Lexan sheet for windows
Traxxas or similar Rod ends and headless screws.
Hex spacers 12mm x 25mm long (or whatever width you need) https://s.click.aliexpress.com/e/_oBqs90U
Wheels and tires (these are your choice but you can use the ones below)
https://s.click.aliexpress.com/e/_oFlU27a
Springs 12mm diameter x 25mm length https://s.click.aliexpress.com/e/_oCiFHe4
Lexan sheet for windows
Traxxas or similar Rod ends and headless screws.
the two main parts need a 250×210 sized bed and must be placed Diagonally to fit. (split sides are also included.)
All the files can be printed without supports with Optional brim.
All the files can be printed without supports with Optional brim.
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Free