SBB280 Snowblower:

Build a strong and effective snowblower for your Burnie222rc loader.
Do you have snow where you live? Then this is a perfect attachment to have with your RC equipment!

-The SBB280 comes with mounts for the Kitten M905, Kitten 937 and Vulpa L102.
-Toothed Auger to chew away at any snow.
-3d printed gear drive for the Auger, this should keep your Auger motor safe from sudden stops, and break the 3d printed gears instead. Its cheaper to print gears than ordering new motors!
-Belt driven Impeller. With a 2:1 reduction the impeller will have the torque needed without overheating the impeller motor!
-Adjustable Funnel, you can adjust the funnel 360 degrees by using a servo! Easy to connect and assemble!
-280mm operating width!

Video of the snowblower in action:
https://youtu.be/XFYHbGBmBwk

Mounts for other loaders or machines can easily be adapted to this blower.

The snowblower is very easy to assemble and comes with a 39page build manual.
A partslist with links to everything needed is included.
A list of screws needed is also included with the download.
There is a HELP folder with pictures of the hardware needed to make it easy for you to source the parts if needed.

Watch how I built mine here (PART 4 has the final design):
https://www.youtube.com/playlist?list=PLdh4mhBIIM2KH6f2A_HQca5XsPoWB1I9C

All STL's are preoriented in the desired orientation to make it easier for you to print.

FIXES:
-4th February 2025 - Removed three STL files which wasnt supposed to be in the download, "WheeledLoaders Deckplate DRV.stl", "WheeledLoaders Deckplate PAS.stl" and "WheeledLoaders Main Mount.stl".
Also fixed a minor mistake on the "Rear coverplate PAS.stl" where it collided with the rear wall.
Download V1.01 to get the update.